|
|
castings
|
|
|
铸造物
|
| 分类：
|
详细解释：
|
|
|
以下为句子列表：
英文: 3 Castings that show major defects during manufacturing or which are not in conformance with dimensions as shown on BW/IP casting drawings may be rejected.
中文: 生产中有明显缺陷的铸件或其规格与BW/IP所提供的设计图不一致的，均视为次品。
更详细...
英文: Abstract: It was verified through experiment and measurement that there was growth phenomenon taking place with nodular iron castings after graphitizing annealing at low temperature.The emergence mechanism and reason of the “ annealing growth nature” was
中文: 文摘:通过试验和测试，证实了球铁件经低温石墨化退火后存在的生长现象，并对这种“退火生长性”产生的机理及原因进行探讨，提出了防止措施。
更详细...
英文: Abstract: Using furan sand to produce heavy diesel engine block and crankshaft eliminated defects of castings including “penetration/burn-in”,“shrinkage porosity”,“big dimension deviation” of cylinder block,“penetration/bum-in”,“misrun”and“run-out”of cran
中文: 文摘:树脂砂铸造工艺应用于大型球墨铸铁件整体铸造柴油机缸体、曲轴生产上消除整铸缸体“粘砂”、“缩松”、“尺寸偏差大”及曲轴“粘砂”、“浇不足”、“漏铁液”等铸造缺陷，具有明显的效果。
更详细...
英文: As part of the renovation, the hotel‘s intricate terra cotta trim was painstakingly cleaned, and damaged pieces repaired with glass-reinforced concrete castings and finishes matched to the originals.
中文: 作为改建的内容之一，该旅馆错综复杂的陶瓷砖装饰部分，被人们煞费苦心地清理干净．一些损坏的部分则采用玻璃(纤维)增强混凝土现浇或预制而成，其修复程度可以与原件相媲美。
更详细...
英文: Based on the mechanism of hot cracking formation of castings, the cracking defects of furnace door frame castings was analyzed, and found that the main reasons causing cracking are as follows: construction of the casting was not reasonable, gating system
中文: 摘要根据铸件产生热裂纹的机理，对炉门框裂纹缺陷进行分析，找到了裂纹产生的主要原因是铸件结构和浇注系统不合理，以及浇注温度过高。
更详细...
|
|
|
|
|
