|
Simulation results show that better atomization can be realized by enhancing the cavitation intensity via increasing the injection pressure difference or decreasing the nozzle inlet round angle-radius ratio.
|
|
|
通过模拟计算可知，提高喷射压差和减小喷孔入口圆角半径都可以提高空穴强度，同时也发现提高喷孔长径比可以使空穴在喷孔出口截面上分布更为均匀。 |
|
Simulation results show that the algorithms above satisfy the requirements of engineering.
|
|
|
仿真实验证明，这两种各具特点的算法都有足够的适用性能。 |
|
Simulation results show that the controller has dual property: On one hand eliminating the uncertainty of system parameters through learning and on the other hand, coping with the random disturbance, thus preferable parameter estimation results and contro
|
|
|
仿真表明：控制律一方面通过学习可消除系统参数的不确定性，另一方面可有效的对付环境的随机干扰，从而能够获得较好的辩识结果与良好的控制目标。 |
|
Simulation results show that the mean relative error of the soft sensing method is less than 0.7% and can meet the practical demands.
|
|
|
仿真结果表明，该软测量方法估计的平均相对误差保持在0.7%以下，可满足实际需要。 |
|
Simulation results show that the method is valid.
|
|
|
计算机仿真结果表明了该方法的有效性。 |
|
Simulation results show that the number of inner product between the image or its residual image and atoms is only 4000 times in each calculaltion step, and the reconstructed image has fine visual quality.
|
|
|
仿真结果表明，每步分解所需计算的图像或图像残差与原子的内积仅4000次，由分解结果重建的图像具有较好的主观质量。 |
|
Simulation results show that the property of the improved algorithms is improved greatly.
|
|
|
仿真结果表明改进后的算法的性能有明显的提高。 |
|
Simulation results show that the proposed algorithm is effective.
|
|
|
计算机仿真结果说明了该算法的有效性。 |
|
Simulation results show that the proposed clutter generation method can generate the clutters having the desired amplitude distribution and spectrum property.
|
|
|
仿真结果表明，所提出的杂波产生方法能够产生满足要求的幅度分布和功率谱特性的杂波。 |
|
Simulation results show that the strategy can be adapted to unsymmetrical transmission to a certain extent.
|
|
|
仿真结果表明，该分配算法对非对称业务传输具有一定的适应性。 |
|
Simulation results show that the technique under the conditions of minimum consummation of fuel is efficient.
|
|
|
仿真计算结果表明，所提出的方法是有效的，可以达到“燃料消耗最小”条件下的准最优。 |
