|
| Feeding system adopts imported linear guide rail pair, hi-precision and long life. Air-liquid damping cylinder assures blade feeding is even and running is stable. |
中文意思：
进给系统采用进口直线导轨副，精度高、寿命长。气液阻尼缸保证锯片进给均匀，运动平稳。 |
以下为相关句子列表(点击查看，可以看对应的解释）：
|
|
Feeding mechanism: bucket hoisting and manual double bell jar feeding mechanism is adopted , which is easy to operate and can prevent gas leakage efficiently.
|
|
|
加煤机构：采用斗提卷扬机构，手动双钟罩加煤装置，操作简便、能有效防止煤气泄漏。 |
|
Feeding mechanism: up roller, middle flashboard and down bell jar or double bell jar feeding mechanism with hydro-automatic drive, featured as easy operation, convenient maintenance and good air-tightness.
|
|
|
加煤机构：液压驱动自动加煤装置，采用上滚筒中插板下钟罩机构或双钟罩结构，操作简单，维修方便，气密性好。 |
|
Feeding on plants; plant-eating.
|
|
|
食草的以食草为生的；食植物的 |
|
Feeding on pumpkin, the insect had the lowest survival rate and had no fecundity.
|
|
|
在南瓜上饲养，茄廿八星瓢虫幼虫及蛹存活率低，成虫丧失产卵能力。 |
|
Feeding on solanum plants such as tomato, eggplant, and black nightshade, the mean development duration of H. vigintioctopuntata had no significant difference, but there was a significant difference when feeding on pumpkin.
|
|
|
结果表明：该虫在3种茄科植物上各虫态发育历期无显著差异；而在南瓜上存在显著差异，各虫态历期明显延长。 |
|
Feeding system adopts imported linear guide rail pair, hi-precision and long life. Air-liquid damping cylinder assures blade feeding is even and running is stable.
|
|
|
进给系统采用进口直线导轨副，精度高、寿命长。气液阻尼缸保证锯片进给均匀，运动平稳。 |
|
Feeding the baby, she's all alone.
|
|
|
独自喂着小孩。 |
|
Feeding 、driving device and rotary cutting adopts inverter to adjust the speed for more powerful drive and stable operation with low consumption.
|
|
|
喂料、主驱动、旋切均采用变频调速，动力强劲、运行平稳、节省能源。 |
|
Feeding, ingate design, air discharge, position of signal wire were analysed and discussed, aiming at the several questions in production of low pressure casting.
|
|
|
摘要根据低压铸造工艺的特点和生产实践，从补缩、内浇道设计、排气、信号线安放位置等方面进行了分析和探讨。 |
|
Feeding. Foraging or Stalking; Prey Capture; Storage/Hoarding; Consummation. Tool Use. Cooperation among Conspecifics.
|
|
|
6栖息地选择。巢穴选择；地盘；分布；迁移。 |
|
Feedrate planning of continuous micro-line's start and end points are discussed, and the constraining conditions, including the machine's acceleration and deceleration capability, allowable error of corner machining, maximum acceleration and dynamical beh
|
|
|
摘要针对连续小直线段高速高精插补算法中起始点和终止点的速度规划，建立了包含机床加减速性能、转接处误差控制、最大加速度以及机床负载功率等的速度约束条件。 |
|
|
|
