|
The influence of insulation effect and resistance property of the cryogenic system on the temperature rise was discussed, the formula of flow temperature rise and optimal flow rate was deduced, the relationship among the flow rate, pipe diameter and flow
|
|
|
摘要论述了低温系统绝热性能和流阻特性对液流温度的影响，推导了液流温升及最优流速公式，分析了流速和管径与液流温升的关系，提出了确定流速和管径的方法。 |
|
The influence of observational error on statistical inference is discussed and the method to diminish the impact of stochastic error is given.
|
|
|
摘要讨论了观测误差对某些统计推断的影响，给出了减小随机误差影响的方法。 |
|
The influence of pipeline flow resistance on net speed of vacuum pump is analyzed in long-distance pipeline vacuum drying, the calculation method of net speed of vacuum pump is given and checked up with site experiment.
|
|
|
摘要分析了长输管道真空干燥中真空泵组的有效抽速受管道流阻的影响，给出了有效抽速的计算方法，并用现场实验对其进行了验证。 |
|
The influence of playoff basketball on the regular season helped set up the No layupsrule, but it also really inspired this strategy, which is what the league seems most concerned about.
|
|
|
季后赛对常规赛的影响有助于建立“无内线直接得分”原则，但这也真正的启发了这个策略，这是联盟看起来最关心的。 |
|
The influence of printing on compressive strength of corrugated carton was analyzed and the advantages of flexography for corrugated carton were put forward.
|
|
|
摘要分析了箱面印刷对瓦楞纸箱抗压强度的影响，提出瓦楞纸箱的印刷采用柔性版印刷的优点。 |
|
The influence of reaction time, reaction temperature and acetic anhydride volume on the degree of acetylation is discussed.
|
|
|
介绍了在用乙酸酐处理甲壳胺纤维制备再生甲壳素纤维过程中，反应温度、乙酰酐用量对乙酰化的影响。 |
|
The influence of retarder on the seaing time and ultimate strength of gypsum plaster was investigated in this paper.The experimental results indicate that the effect of single retarder,such as citric acid,is inferior to that of composite retarder which Wa
|
|
|
研究了分别以柠檬酸、柠檬酸与普通硅酸盐水泥复合物作缓凝剂,调节粉刷石膏的凝结时间,并对比2种缓凝体系对石膏抗折、抗压强度的影响.比较不同保水剂(聚乙烯醇、羧甲基纤维素)以及相同量的保水剂在不同工艺流程下保水效果上的区别.探索了有机保水剂和无机保水剂对粉刷石膏的保水性的影响.结果表明,柠檬酸与普通硅酸盐水泥的复合缓凝剂比单纯的柠檬酸更能有效地延缓建筑石膏的凝结,同时建筑石膏的抗折、抗压强度降低幅度减小. |
|
The influence of rolling speed is not distinct.
|
|
|
轧制速度对界面结合的影响不明显。 |
|
The influence of rotational speed and axial location(six locations) was summarized.
|
|
|
研究了不同转速下不同轴向位置（6个轴向位置）时旋转盘腔内部流场的分布规律。 |
|
The influence of shearing deformation causes the non-uniform stress in the wing plate of the box girder, especially the cantilever box girder.
|
|
|
摘要剪切变形的影响使得箱形梁的翼板中出现应力不均匀现象，尤其是悬臂箱形梁剪力滞现象。 |
|
The influence of some raw materials such as polyester the uniformity, vesicant foams and catalysts to the preparation of rigid polyurethanes foam is also discussed.
|
|
|
探讨了聚酯多元醇、泡沫稳定剂、发泡剂及催化剂等原料对硬质聚氨酯泡沫塑料制备的影响。 |
