|
Abstract: The paper shows the relative deformation function of the cam mechanism with a roller follower as a linear time-invariant system,and gives the detail about the response limitation for the dynamic design and modification of cam mechanisms.An examp
|
|
|
文摘:以滚子从动件平面凸轮机构为分析对象，提出了相对变形函数这一新概念，并从理论上对其进行了研究，最后借助于一凸轮机构在不同参数下其摆臂最大相对变形量的数值计算过程与结果，阐述了基于该理论的凸轮机构动态设计与修改的具体实现步骤与方法。 |
|
Abstract: The paper studies the important technique and index in application scope， equipment configuration， operating duty， energy consumption， irrigation application efficiency and economic benefit of pipe-sprinkler combined irrigation, and presents the
|
|
|
文摘:针对管喷结合灌水技术的应用范围、设备配置、运行方式、能耗、灌溉水利用系数以及效益等关键技术及指标进行了探讨，并提出了低压管道和多孔式微喷带结合系统的使用方法。 |
|
Abstract: The paper studies the solutions of seamless coverage of 3G wireless networks, including indoor coverage, typical coverage applications of urban and rural area.
|
|
|
摘要：本文分析研究了3G无线网无缝覆盖的主要解决方案和技术手段，内容涉及室内覆盖、城区中各类典型区域以及农村地区的覆盖解决方案。 |
|
Abstract: The paper suggests two methods for adjusting the mesh clearance in cylindrical worm drive:one is to adjust the meshing center distance of worm gears,the other is to use dual lead cylindrical worm, introducing briefly the principle of adjustment
|
|
|
文摘:提出了两种调整圆柱蜗杆传动啮合侧隙的方法:通过改变蜗轮蜗杆的啮合中心距来改变其啮合侧隙;采用双导程蜗杆传动以调整蜗轮蜗杆的啮合侧隙,简述了调整原理,并比较了两种调整方法各自的特点。 |
|
Abstract: The paper summarized the mathematical model and the relation between microstructural changes and mechanical properties.The developing history and trend for the prediction and control technology of microstructure and mechanical properties were ex
|
|
|
文摘:概述了热轧产品显微组织演变的计算机模型以及显微组织与力学性能之间的关系.简要阐述了组织-性能预报和控制技术的发展历程和发展趋势，讨论了组织-性能预报和控制技术在生产上的应用. |
|
Abstract: The paper summarized the present situation of nitrate pollution in some area of our country where the surface water, underground water and vegetable crop were polluted by using nitrogen excessively, put forward some proposals and control counter
|
|
|
文摘:概述了我国部分地区因过量施用化肥氮而导致对地面水、地下水及蔬菜造成硝酸盐污染的现状；提出了制定《农田施肥污染防治管理规定》等防止农业生态环境氮污染的对策意见。 |
|
Abstract: The paper takes the medical insurance of Shenzhen City as an example, introducing the development of the information technology in medical insurance from the unprofessional angel.
|
|
|
摘要：本文以深圳市为例，从非技术角度，介绍了医疗保险信息化的发展过程和医疗保险信息化监管的内容，并展望了医疗保险信息化及信息化监管工作的前景。 |
|
Abstract: The paper tries to illustrate the compatibility and incompatibility between concepts and their orders by probing into the realtions of the concepts,which gives reader a clear understanding of the concepts,the order and the compatibility of the c
|
|
|
文摘:力求通过概念之间关系的探讨，理清概念间相容与不相容以及它们的层次关系，使人们对概念及概念的层次、相容等关系有一个清楚的了解，以指导工作实践. |
|
Abstract: The paper,taking standard language data from modern chinese work since the time of May 4th movement, focuses on analysing the three dimensions in the variables of disyllables in forming ner words of morden Chinese: disyllables expanded from sing
|
|
|
文摘:本文以五四以来典范的现代白话文著作中的词语为例，分析了现代汉语双音节化主要的三种途径：单音节词扩充为双音节词，三音节或多音节词压缩为双音节词，词组凝固为双音节词。 |
|
Abstract: The parallel computer's resource can be used efficiently by proper task partitioning and parallel granularity controlling.By analyzing the characteristic of simulation program,this paper points out a task partitioning algorithm which take state
|
|
|
文摘:有效地进行任务划分、控制并行粒度，才能充分利用并行计算机的资源，通过对复杂连续系统仿真程序特点的分析，提出了以状态方程为核心、以右函数段的计算为主要对象的自动任务划分算法，使用结果表明具有很好的并行效果。 |
|
Abstract: The park design is about the renovation and enlargement based on an old shelterbelt in the suburb.
|
|
|
摘要:这是一个依托城郊老旧防护林带进行更新扩建的公园设计。 |
