|
The surface reflection was done very simply.
|
|
|
现在表面的反射和折射效果看起来太简单了。 |
|
The surface restoration layer of a gear wheel, which had run in lubricating oil with PBC restoration agent was analyzed using TEM, SEM, XPS, AES and Raman; and the mechanism of reducing friction of the restoration agent was studied.
|
|
|
以透射电镜、X射线光电子能谱仪、俄歇电子能谱仪和拉曼光谱仪分析了在添加摩圣修复剂的润滑油中运行过的齿轮表层，对摩圣修复剂的减摩机理进行了分析。 |
|
The surface roasts a pair of light with second layers to gather the cosmetics end TU2 CENG2 purely, having anti ultraviolet ray and bearing aging,not cracked,constant the function of the color,can have erosion of resist the sandstorm,rain water most effec
|
|
|
表面烤有双层亚光纯聚脂粉末涂层，具有抗紫外线、耐老化、不龟裂、不变色的性能、能最有效有抵御风沙、雨水的侵蚀。 |
|
The surface roughness comparison specimens are used to calibrate the surface roughness of workpieces by comparison. They are widely used in machinery industry.
|
|
|
表面粗糙度比较样块是用比较法检查零件表面粗糙度的一种量具，在机械工业生产中得到广泛的应用。 |
|
The surface semi-conducting layer is widely used to control the electric field and suppress the surface corona discharge in both HV power cable termination and the end turns of HV generator stator winding.
|
|
|
摘要表面半导电层结构可以均匀电场和抑制表面电晕放电，因此被广泛应用于高压电力电缆接头和高压发电机定子线圈端部绝缘中。 |
|
The surface strength, brightness, opacity, glossiness, and absorbency are influenced by the amount of binder in the coating.
|
|
|
摘要涂料中胶粘剂的用量直接影响纸张的印刷表面强度、白度、不透明度、光泽度和吸收性。 |
|
The surface structures of the pink freshwater pearls from Jiangsu-Zhejiang region and the white seawater pearls from Guangdong Province are studied by using polarizing microscope and scanning electron microscope (SEM).
|
|
|
以产于江浙地区的粉色淡水珍珠和产于广东省的白色海水珍珠为研究对象，采用偏光显微镜和扫描电镜测试方法对其表面结构进行了观察。 |
|
The surface temperature is less than 3℃ above the dew point.
|
|
|
底材表面温度没有达到高于露点3℃以上的条件下。 |
|
The surface temperature must be above the dew point. Dry surface completely before application.
|
|
|
表面温度必须在露点以上，施工前彻底干燥表面。 |
|
The surface temperature of the substrate should be at least 10℃ and 3℃ above the dew point. Temperature and humidity should be measured in the vicinity of the substrate.
|
|
|
底材温度10℃以上，比空气露点温度高出至少3℃，温度和相对湿度在底材附近测量。 |
|
The surface texture produced by such a treatment or coating.
|
|
|
涂饰后的表面通过最后这道工序制造的表面纹理 |
