|
Insert disk1 into drive A(or whatever drive you prefer).
|
|
|
把磁盘1插入到驱动器A中（或你想要插入的驱动器）。 |
|
Insert earbud and rotate it up until is fits snugly. The arm of the unit should be about 10°above horizontal as shown.
|
|
|
戴上并旋转耳塞至耳朵感觉最舒适时止。如图所示，本设备之前臂应置于水平线以上10°左右。 |
|
Insert four new AA-size alkaline batteries and make sure that the + and – on the batteries are aligned according to the polarity diagram inside the battery holder.
|
|
|
插入4节新的AA型碱性电池,使电池的正负极按电池架极性指示方向放入。 |
|
Insert lead wires. Insert the white lead wire on the right side. Insert the black wire on the left.
|
|
|
黑色导联线插入左侧。 |
|
Insert media in the drive and run the test again.
|
|
|
请在驱动器中放入介质，然后再次运行检测。） |
|
Insert nut is designed for rapid installing into thermo-plastics by means of ultrasound. Its two opposite helical knurl bands provide a combination of high torque and pulling out resistance.
|
|
|
压入式螺母通过加热或利用超音波可快速安装到热塑性塑料中,它的两道相反旋向的压花带可提供较高的抗扭转和抗拉拔能力. |
|
Insert on a new layer the picture of a diamond.
|
|
|
新建层，添加一款钻石的图片。 |
|
Insert on the new layer the picture having the fringe on it.
|
|
|
找张花边图片插入到新层中。 |
|
Insert one sim card into the stainless channel steel. tear out the sticker on the other side.
|
|
|
1插入一张卡到不锈钢槽里,把另一端的贴纸撕开. |
|
Insert special bolt into the preset hole of C form parts ,where the bolt will be fixed into the threaded hole of wedge ,then screw the bolt on with a socket spanner until the first nut drops .
|
|
|
将专用螺栓插入C形无件预留孔与楔块的螺纹孔相连，用套筒扳手拧紧螺栓直到第一个螺帽自行断落。 |
|
Insert stem assembly (A) and hold disc on seat ring in closed position, as shown.
|
|
|
插入阀杆总成(A)，并在关闭状态下握住阀座环上的阀瓣，如图所示。 |
