|
This paper introduces the main geological disasters in Jiangxian County such as the land slip,slide,mudflow,and ground fissure,etc.,analyzes on the formation mechanism and influencing factors of these disasters,and advances some suggestions.
|
|
|
介绍了发生在绛县的滑坡、崩塌、泥石流和地裂缝等主要地质灾害,分析了主要地质灾害的形成机制及影响因素,并提出了一些建议。 |
|
This paper introduces the main parameters of Chinese digital television terrestrial broadcasting transmission standard and gives part of the laboratory testing results, indicating that the main technical performance of the standard is obviously better tha
|
|
|
摘要介绍了中国地面数字电视广播传输标准的主要参数并给出了部分实验室测试结果，测试表明，该标准的主要技术性能明显优于国外标准。 |
|
This paper introduces the main qualifications,overall design,hardware circuit diagram and software design of a new protector that can be used in the feeder switch in the shafts of the coal mines.
|
|
|
介绍了煤矿井下用于馈电开关的一种新型保护器的主要技术指标、总体设计、硬件电路框图和软件设计。 |
|
This paper introduces the measurement methods and results of CDQ-Boiler system for mass and energy balance diagnosis, analyses the technologic economic index at the different product rate, puts forward the measures of decreasing the ratio of coke burning,
|
|
|
摘要介绍了宝钢三期干熄炉－锅炉系统质能诊断方案及其测试结果，分析了不同生产率下的主要技术经济指标，提出了今后进一步降低焦炭烧损率，改善炉内传热和实现优化控制的技术措施。 |
|
This paper introduces the measures we made to reduce the aberration in colour paper production.
|
|
|
摘要针对色纸生产过程中经常出现较大色差的情况，本文介绍了减轻色差采取的一些措施。 |
|
This paper introduces the mechanism of the electro-hydraulic control system of the hydraulic support on comprehensive mechanized mining face, probes into the main functions of both subordinate controller and principle controller and the design of CAN node
|
|
|
介绍了综采工作面液压支架电液控制系统的原理,探讨了子控机和主控机的主要功能及其CAN节点的设计。 |
|
This paper introduces the method by which to compile General Indexes Catena of Traditional Chinese Medicine Classics, also points out the difficulties in this work and its countermeasures.
|
|
|
摘要介绍计算机技术用于《中医药典籍通检系列》丛书的编制方法以及编制过程中遇到的难点与对策。 |
|
This paper introduces the method of functional approaching method analysis of the four-combined-poll installation in order to approximately achieve the given curve lines.
|
|
|
摘要本文用函数逼近法综合铰链四杆机构，使其近似实现给定的连杆曲线。 |
|
This paper introduces the method of using the simulation tool GENESYS FOR PLLfor the PLL Synthesizer design, and presents the analysis of the simulation results on bass of which some guiding practical conclusions are drawn, and some problems requiring att
|
|
|
摘要介绍了仿真软件GENESYS在锁相式(PLL)频率合成器设计中的使用方法，并对仿真结果进行了分析，得出了一些有指导意义的实用性结论，列出了在仿真时需要注意的问题。 |
|
This paper introduces the methods of using the virtual prototypical technology, with the aid of in ADAMS software this operation platform, in view of some commercial vehicle in front of the suspension establishment dynamics model, and carries on the kinem
|
|
|
摘要采用虚拟样机技术，借助于ADAMS软件这个操作平台，针对某商务车前悬架建立了多体动力学模型，并对其进行运动学仿真分析。 |
|
This paper introduces the necessity of and concrete measures for the quality control and quality inspection in the cement-powder spaying pile construction,and probes into the steps of construction acceptance and the requirements and methods for the qualit
|
|
|
介绍了粉喷桩施工中质量控制、质量检验的必要性和具体做法,探讨了工程验收的步骤、质量评定的要求和方法。 |
