|
Simulation studies prove the stability and convergence.
|
|
|
同时，又证明了已有的算法只是新算法的一个特例。 |
|
Simulation system of 157-radar terminal realizes the engineering analyzing simulation, hardware in the loop simulation, malfunction analyzing simulation and equipment data library of 157-radar terminal.
|
|
|
仿真系统实现了157雷达系统的工程分析仿真、故障分析仿真、与157雷达设备相连接的半实物仿真、设备数据库等功能。 |
|
Simulation system of a single axis stabilized turntable system shows that the peak of the stabilization error is caused by the step friction disturbance torque.
|
|
|
针对一个单轴稳定转台进行的仿真和实验结果表明，在扰动换向时产生的稳定误差尖峰由扰动换向时的阶跃摩擦干扰力矩产生。 |
|
Simulation test performed on GEV-RCC by use of three different grouting methods under different grouting ratios shows that it is an effective measure to determine reasonable grouting method and mixing-ratio for GEV-RCC.
|
|
|
采用3种加浆方式和不同的加浆率对变态混凝土进行仿真试验，结果表明，仿真试验可用于变态混凝土加浆方式和加浆率的研究与确定。 |
|
Simulation test results show that this method may reduce the uncertainty of individual sensor data and enhance systems,capacities of discernment to targets.
|
|
|
仿真实验结果表明，该方法可以减少单一传感器的不确定性,增加结果的可分离性,从而提高系统对目标的识别能力。 |
|
Simulation test shows that better applicability is presented by fitting the shock response signal curve in frequency domain, and the allround optimization ability of GA is adaptable in fitting the signal under this form.
|
|
|
仿真试验表明，冲击信号在频域内的拟合具有较强的适用性，遗传算法的全局优化能力适合于该组合形式下的冲击信号拟合。 |
|
Simulation tests show that the machine's acceleration and deceleration capability is the key factor to the NC machining efficiency and precision when the turning angle between micro-lines is small, and the error of corner machining is the predominant fact
|
|
|
通过仿真实验得出：当连续小直线段间拐角较小时，机床加减速性能是影响加工效率和表面精度的最主要因素；当拐角增大到一定程度时，误差的限制成为约束速度提高的主要矛盾；当拐角较大时，机床的最大驱动力矩起到主要作用。 |
|
Simulation: Confidential Instructions and Briefing Books for the Chlorine Game will be handed out at the end of this class session.
|
|
|
摸拟主题：将在课程结束时发予对氯化合物策略的机密指示与简报。 |
|
Simulations of channel characteristics, a basic part of system simulations, are of vital importance meaning for both analysis and simulation of channel estimation, switching algorithm and power control.
|
|
|
信道特性的仿真是系统仿真的重要组成部分，对信道估计、切换算法和功率控制等方面的分析与建模有重要的意义。 |
|
Simulations of magnetic fields generated by the Antarctic Circumpolar Current at satellite altitude: Can geomagnetic measurements be used to monitor the flow?
|
|
|
在卫星高度南极周围电流所产生磁场的模拟：地磁测量能用监视器流的吗？ |
|
Simulations of microstructure evolution for a flange axle hot forging were given, which effectively tested program feasibilities and played a certain role in guiding prediction on numerical simulation of microstructure evolution during metal hot forging.
|
|
|
通过法兰轴的热锻过程中微观组织演变的实例，有效地验证了程序的可行性，对金属热锻过程微观组织预测有一定的指导作用。 |
