|
The mechanism was explained by polarization curves and SEM.
|
|
|
通过极化曲线和扫描电镜研究了该缓蚀剂的缓蚀机理。 |
|
The mechanism, equipment of electrical source and types of reactors are presented, and development progress is reviewed.
|
|
|
并对该技术在水处理方面应用的原理、反应器的形式以及国内外的研究进展、成果、存在的问题进行探讨。 |
|
The mechanism, parts, appearance characteristics, impact factors of the naphthenic acid's corrosion in the process of crude distillation were analyzed, and put forward the reasonable antisepsis measures were put forward.
|
|
|
摘要分析了环烷酸在原油蒸馏过程的腐蚀机理、腐蚀部位、腐蚀的外观特征、影响因素,提出了合理的防腐措施。 |
|
The mechanisms could be classified as sublimation , melt , thermal spalling , detachment of grains , vaporization , and spalling of grains adhered to the surface by resolidified phase .
|
|
|
将蚀除机理归纳为六种:升华、熔化、热剥离、整体颗粒移除、气化、再凝固粘附相的热削离。 |
|
The mechanisms for starting and terminating a program are discussed.
|
|
|
讨论程序启动与终止的机制。 |
|
The mechanisms have caused the majority of levee failures worldwide; one way or another, water weakens the barrier's base until the barrier topples or collapses.
|
|
|
全世界的堤防破损大多不出这几种原因:由于某种因素,洪水淘空屏障的底部,最后造成屏障倒塌或溃决。 |
|
The mechanisms of SOC stabilization are associated with the capacity of SOC sequestration, and studies in this field will help the governments make efficient policies and decisions to reduce greenhouse gas emission.
|
|
|
土壤有机碳的稳定机制决定着土壤固定和储备有机碳的能力,对有机碳稳定机制的研究,将为政府制定有效的温室气体减排措施提供依据。 |
|
The mechanisms of energy loss in the process of heavy ion interaction with biomolecule are analyzed and discussed, the recent related research progresses arc reviewed and some future research directions are indicated.
|
|
|
摘要对重离子与生物分子相互作用中能量损失的物理机制进行了分析和讨论,对现有电子能量损失的研究进展进行了评述,指出将要研究的方向。 |
|
The mechanisms of the sensing systems were modified to solve the sampling problems.
|
|
|
利用取样机构的改良以解决取样不均之问题。 |
|
The mechanisms responsible for synergism between alkyl benzene sulfonate and methyl oleate in surfactant/brine/model oil and surfactant/alkali/model oil systems were studied.
|
|
|
摘要研究了表面活性剂/盐/模拟油体系与表面活性剂/碱/模拟油体系中油酸甲醴与表面活性剂协同效应机理。 |
|
The mechanisms summarized are as follows 1) compressional normal stress; 2) ductile and/or viscous deformation in bedding fault since incompetent bed is susceptible to plastic flow; 3) higher likelihood of clay/shale smearing; 4) foliation fabric whose se
|
|
|
其机理可归纳为四个方面:1)压性的正应力;2)以韧性及粘性变形为主,因为非能干岩层易塑性流变;3)涂抹效应强;4)面理化组构,垂直面理方向的封闭能力大大增强。 |