|
Remove cover bolts and cover.
|
|
|
拆卸阀盖螺栓和阀盖。 |
|
Remove covers and remove Disc Assembly.
|
|
|
拆卸盖子,并拆卸阀瓣总成。 |
|
Remove dead skin cells and remove dirts and excess oils from pores, rich in leather. Can use directly on skin.
|
|
|
能软化角质,彻底洁净毛孔脏污和多馀油脂,泡沫柔细。可直接使用。 |
|
Remove diaphragm bolts (9) and lift off spring chamber (4).
|
|
|
拆卸隔膜螺栓(9),提升弹簧腔室(4)。 |
|
Remove disks or other media,press any key to restart.
|
|
|
移除硬盘(磁盘)或者另外的媒体(存储介质),请按任意键重启! |
|
Remove dust and dirt by high-pressure air before paint application.
|
|
|
用高压空气吹扫除去灰尘等污物。 |
|
Remove egg whites and drain.
|
|
|
盛起蛋花,沥乾油分,用热水略冲。 |
|
Remove excess solder with small brush while plastic (soft), leaving a fillet around end of valve as it cools.
|
|
|
在焊接部分成型后,用小刷子清除多余的焊料,使其在焊料冷却后形成一个环绕连接端口的圆角。 |
|
Remove excess solder with small brush while plastic, leaving a fillet around end of valve as it cools.
|
|
|
当焊料处于粘滞状态时,用刷子把多余的焊料清除干净。焊料冷却后,将一条嵌条环绕在阀门的端口。 |
|
Remove excess water from the canal with a paper point.
|
|
|
用纸尖吸除根管内多余的水分。 |
|
Remove exterior packing and place installation components aside.
|
|
|
把外部包装拆卸掉,并把需要安装的部件放在旁边。 |