|
The results show that these reflective phase compensators own some advantages of high-reflectivity, continuous tunable phase compensation etc.
|
|
|
分析结果表明，这些反射型相位补偿器都具有反射率极高、相位补偿连续可调等优点。 |
|
The results show that thinner radar absorbing coatings can strongly attenuate high frequency surface waves, while alternate using of thin radar absorbing coatings and thin radar absorbing coatings compounded by frequency selective surfaces can strongly at
|
|
|
实验结果表明，低厚度的雷达吸波涂层就可以实现高频表面波的强衰减吸收，而频率选择表面与低厚度雷达吸波涂层相结合的复合涂层与雷达吸波涂层共同交替使用可以实现宽频段表面波的强衰减吸收，有望实现目标物体在宽频段范围内的高性能均衡雷达隐身。 |
|
The results show that those two modifications have certain impact on the inlet flow field.
|
|
|
计算结果显示，这两项措施对风机进口处流场的改善起到了一定的作用。 |
|
The results show that through batch annealing after cold rolling, the steels exhibit excellent drawability and enamel ability.
|
|
|
因此综合考虑，采用罩式退火工艺可实现成型性能和贮氢性能的良好匹配。 |
|
The results show that unbalance force of atmospheric motion and the coupling reaction among convective cloud cluster and moisture frontal zone and low level jet lead to the continuation of strong convergence in low layer and the maintenance of torrential
|
|
|
分析结果发现，大气运动非平衡强迫、凝结降水的非均匀分布与强烈垂直风切变的耦合作用、“湿度锋”与低空急流的耦合相互作用通过促进低空辐合流的维持，导致了对流云团和暴雨天气的持续。 |
|
The results show that under the same lapping conditions the Si3 N4 ball has the lowest material removal rate and the best roundness and roughness, followed by ZrO2, Al2O3, and SiC ball.
|
|
|
结果表明：在相同的研磨条件下，具有长柱状晶粒的氮化硅陶瓷球加工速率最低，但圆度和表面粗糙度最容易控制；氧化锆和氧化铝陶瓷球表面质量次之，碳化硅陶瓷球加工速率最高，圆度和表面粗糙度最难控制。 |
|
The results show that university-related social capital shows significant positive correlation with respective annual salaries, as well as with respective work posts, in their first and third year entering the labour market; while family-related social ca
|
|
|
研究结果表明，高等教育阶段积累的社会资本与其进入劳动力市场第1年和第3年时的年薪收入水平之间存在显著的正向影响，同时也与其进入劳动力市场第3年时的职位等级之间存在显著的正向影响，而毕业生的父母家庭所拥有的社会资本则与上述职业发展成就指标之间不存在显著性影响。 |
|
The results show that vibration parameters have a great effect on the surface roughness and the tool life.
|
|
|
在精密车床上进行了金刚石刀具超声振动切削不锈钢零件的加工实验。 |
|
The results show that vorticity advection, thermal advection and latent heat release made great contribution to the development of the depression.
|
|
|
中低层的温度平流、降水凝结释放潜热维持上升运动，是低压进一步发展的有利条件。 |
|
The results show that we can acquire high fidelity exportation of the light field with selecting the parameters of entangled atom pair and binomial light field parameters, and function time of the light and atom.
|
|
|
结果表明：选取恰当的初始原子纠缠参量和初始二项式光场参量，以及控制好相互作用时间，可以获得光场的高保真输出。 |
|
The results show that welding parameters do have influence on the microstructure and shear strength of welds.
|
|
|
结果表明，不同的焊接参数对于钢筋焊接网的剪切性能和组织有不同程度的影响。 |
