|
Abstract: The light atom imaging method in high resolution transmission electron microscopy (HRTEM) and its application in crystal structure analysis for a series of metastable oxides of copper, nickel and silver is described.The idea stemming from this m
|
|
|
文摘:介绍了利用高分辨电子显微学进行晶体结构分析的一种方法――轻原子成像法的建立过程及其在铜、镍、银等金属的初期氧化(硫化)产物结构分析中的应用.介绍了利用轻原子成像法的思想解决厚膜上观察表面结构的可能性问题的新进展. |
|
Abstract: The long cycle of supply chain is the main reason of the unparallelism of the production and distribution, thus resulting in the overstock and higher cost.
|
|
|
摘要：供应链周期过长是造成产销不对应，库存积压、成本过高的一个重要原因。 |
|
Abstract: The lubricating condition of cold rolling is affected by many factors.This paper shows the relationship between the friction coefficient and three rolling parameters, such as rolling speed,reduction and concentration of rolling lubricating oil.
|
|
|
文摘:主要研究了在冷轧过程中,轧机辊缝摩擦系数受轧制速度、相对压下量以及乳化液浓度因素影响的变化规律。 |
|
Abstract: The magnetic moment of a hydrogen atom is calculated by using the solution of the relativistic wave equations.It is shown that the so called total magnetic moment are produced from the electron orbit motion.These results show that the total angu
|
|
|
文摘:利用氢原子的相对论性波动方程解计算了氢原子的磁矩.结果表明，现行量子理论中所谓的总磁矩实际上都是由电子的轨道运动产生的，由此提出了所谓的总角动量实际上是相对论性轨道角动量的看法. |
|
Abstract: The main aim of this lecture is to provide some basic knowledgefor the implementation of quality management, including: (1)the definition and the significance of quality, (2)the organization of quality management, (3)the processes and tools for
|
|
|
文摘:本讲座的主要目的是为质量管理工作的实施提供一些基础知识，内容包括：(1)质量的定义和重要性；(2)质量管理的组织；(3)持续改善的过程和工具，包括PDCA和统计过程控制工具；(4)抽样检验，包括随机取样、接收曲线和卖方、买方风险；(5)产品设计工具，包括质量功能展开(质量屋)和田口方法的概念；(6)质量管理的国际标准，马尔科姆.鲍德里奇奖和戴明奖。 |
|
Abstract: The main characteristics of leveraged buy-out were analysed,and financing methods using the leverage principle were proposed.
|
|
|
文摘:分析了杠杆收购的主要特点,提出了在公路建设和高新技术开发中运用杠杆原理融资. |
|
Abstract: The main characters and seed set of BC1，BC2，BC1F2 from MS line back-crossing with the pollen of hybrid rice were studied.The appearance of a large number of self fertile plants in MS line was analyzed.The effect of introgression of restoring gen
|
|
|
文摘:研究了杂交稻花粉对母本不育系回交后代群体BC1、BC2、BC1F2的主要农艺性状和育性表现，分析了不育系中出现大量自交结实株的原因，讨论了恢复基因渗入对籼、粳不育系纯度和杂交稻产量的影响，指出“同质恢”对降低不育系纯度的严重性和杂交稻作制种田隔离区的不合理性。 |
|
Abstract: The main economic properties, growth characteristics and corresponding high yield culture technology of Simian 3 were investigated,and the results indicated that Simian 3 is suited to plant in Jingmen by comparative analysis of continuous cultur
|
|
|
文摘:以泗棉三号连续4a在荆门地区与湖北省主栽品种鄂棉18的对比分析，探索了泗棉三号在荆门地区的主要经济性状、生育特性及相配套的高产栽培技术，表明泗棉三号适宜在荆门地区种植。 |
|
Abstract: The main factors affecting design parameters of mixer-settler are discussed, the general principle and methods to determine parameters in design are clarified and some experiences data for design are put forward.
|
|
|
文摘:就影响混合澄清器设计参数的主要因素进行了探讨，阐述了设计过程中确定参数的一般原则和方法，并提出了一些设计用的经验值。 |
|
Abstract: The main factors of influencing national vehicle markets are analyzed.The vehicles possessing capacity prediction models are set up base d on exponential smoothing,multivariant regression and neural network.The applic abilities of the three mode
|
|
|
文摘:对影响我国汽车市场的主要因素进行了分析，建立了以指数平滑、多元回归、神经网络为基础的汽车保有量预测模型，并对三种模型的适用性作了简单分析. |
|
Abstract: The main factors that affect the reliability of the building automatic control system(BAS) and the reliability design technique applied in the whole process of the system design are introduced in this paper.
|
|
|
摘要：介绍了影响楼宇自控系统(BAS)可靠性的主要因素以及在系统设计的全过程中可采用的各种可靠性设计技术。 |
