|
| The factors such as original error, workpiece center height, top angle of apron, shape of grinding zone, position of side apron etc, which affect the circularity and straightness of the grinding workpiece in centerless grinding were analysed in this paper |
中文意思：
影响工件几何形状的因素很多，但影响工件某项几何要素的因素是特定的，如果将这种特定的因素进行总结，可以对实际生产过程进行指导。 |
以下为相关句子列表(点击查看，可以看对应的解释）：
|
|
The factors included the characters of terranes and weak interbeds and the intersections with slope surface; the characters and combinations of structure joints and the intersections with slope surface; combinations of lithology; dualistic structure of M-
|
|
|
按红层边坡岩体结构状态，把红层边坡岩体结构划分为4种，然后又按红层边坡岩体的岩性组合特征、岩层产状与坡面产状的关系、结构面的发育情况及其与坡面的关系、以及上覆堆积土的边坡岩体的坡顶线形状和岩土组合特征细分为13个类型和亚类。 |
|
The factors influencing the viscosity property of kaolin pigment were introduced, followed by the modification methods, such as mechanical process, treatment with dispersant, etc.
|
|
|
摘要介绍了高岭土的黏度改进加工方法，如机械加工，分散剂处理等。 |
|
The factors of jet classifier for super-fine powder are investigted by orthogonal experiment, the best work parameters for the classifier are found out.
|
|
|
摘要采用正交试验设计和直观分析的方法，对影响超细粉体射流分级机工作的各因素进行研究，从而找出该分级机的最佳工作参数。 |
|
The factors of strong effect on the practical tensile strength (distinguished from the intrinsic strength) were investigated and a group of amorphous alloys with high practical tensile strength were obtained.
|
|
|
找出了使非晶材料获得高工程强度（有别于材料的内察强度）的途径，并通过它开发出了高抗拉强度的实用非晶带状结构材料。 |
|
The factors stated are based upon a fully open valve.
|
|
|
这里所述的流量系数是指阀门全开时的流量系数。 |
|
The factors such as original error, workpiece center height, top angle of apron, shape of grinding zone, position of side apron etc, which affect the circularity and straightness of the grinding workpiece in centerless grinding were analysed in this paper
|
|
|
影响工件几何形状的因素很多，但影响工件某项几何要素的因素是特定的，如果将这种特定的因素进行总结，可以对实际生产过程进行指导。 |
|
The factors that affect the concentration of ozone water, mass transfer efficiency and effective dissolving efficiency such as ozone gas concentration, gas to liquid ratio, system pressure and dissolving methods are discussed.
|
|
|
讨论了应用臭氧量、气液比、系统压力和气液溶解方式对臭氧水浓度和臭氧有效溶解效率的影响。 |
|
The factors that influence punch die Longevity have been summarized according to technique conditions and working circumstance with analysis of some important parts of these factors, some technical ways to improve the die longevity brought up, especial on
|
|
|
摘要对影响冲裁模使用寿命的各种因素分为模具技术状况与工作环境进行了概括，并就其中一些环节进行了分析，提出了提高模具使用寿命应采取的一些技术措施，特别是模具使用与维护时应注意的一些问题。 |
|
The factors that influence the dyeing for brilliant green shades on knitted cotton fabrics have been studied by analyzing structure of dye and the mechanism of dyeing, so the optimized parameters were obtained and some frequent encountered problems during
|
|
|
摘要从艳绿色拼色染料结构、染色机理的角度探讨了影响针织物活性艳绿色染色的因素，制定了一套适合的染色工艺，解决了活性染料在纯棉针织物上拼染艳绿色易出现色花、色点、色差和风印等质量问题。 |
|
The factors that influence the operational efficiency of commercial banks in China mainly concern their state of profitability, stability and administration.
|
|
|
影响我国商业银行运行效率水平的因素主要包括盈利性状况、稳定性状况和公司治理状况。 |
|
The factors that restrict the quality of PAN precursor, such as the type of polymerization monomer in the polymer, spinning method and technique, tensile technique, compacting level by drying, oiling technique and the type of oil, must be paid great atten
|
|
|
制造品质优异的原丝的主要制约因素有聚合体中共聚单体类型、纺丝方法及工艺、拉伸工艺、乾燥致密化程度、上油工艺及油剂类型。 |
|
|
|
