|
| Abstract: In this paper, the cold die forging technology of the counter gear was analysed, the cold die forging was designed, the blank dimensions and the figure were calculated and choosed, the allowable deformation degree was checked, the equipment for |
中文意思：
文摘:分析了计数器齿轮的冷模锻工艺，设计了冷模锻件图，计算及选用了毛坯尺寸及形状，验算了许可变形程度，选择了变形用的设备，拟制了冷模锻前的毛坯处理及设计了冷模锻模具结构。 |
以下为相关句子列表(点击查看，可以看对应的解释）：
|
|
Abstract: In this paper, the application of splitting grouting method to danger removal and dam reinforcement in Pishihang Irrigation District, is illustrated and the engineering effect is introduced too.
|
|
|
摘要:文章介绍劈裂灌浆法在淠史杭灌区堤坝除险加固过程中的应用和取得的效果。 |
|
Abstract: In this paper, the author discusses the origin and the development of the aseismic design medel code,approaches the role and the characteristics of the model code, points out the necessity and the ways of drawing up and developing the model code
|
|
|
文摘:论述了抗震设计样板规范的由来和发展，探讨了样板规范的作用和特点，提出了在我国编制和发展样板规范的必要性和途径，且提出了一套较完整的、基于性态设计的工程结构使用功能分类和抗震设计分类的原则、框架和方法。 |
|
Abstract: In this paper, the author presents a conception for founding a new generation of open – type auto – meter – reading (AMR) system flat, and introduces emphatically its basic principle, technique requirement and design way.
|
|
|
摘要：本文提出了建议新一代的开放式自动抄表平台的思想，并着重介绍了构建平台的基本原则，技术要求和设计方式。 |
|
Abstract: In this paper, the authors analyse the formation mechanism of Yankou landslide by studying its engineering geological environmental conditions and developing character, perform simulation analysis on the stress field, displacement field and disp
|
|
|
文摘:通过对岩口滑坡工程地质环境条件及滑坡发育特征研究，分析滑坡的形成机制，并用拉格郎日差分法对斜坡变形破坏的应力场、位移场及位移速度特征进行模拟分析，从而验证滑坡形成机制的正确性，并在此基础上进行稳定性计算与评价。 |
|
Abstract: In this paper, the basic constitution, the mathematical base, the main design points, the working program and the application of the CCD correlation tracker are described.
|
|
|
文摘:描述了CCD相关跟踪器系统的基本结构和数学基础，给出了系统设计要点、工作流程及其应用成果。 |
|
Abstract: In this paper, the cold die forging technology of the counter gear was analysed, the cold die forging was designed, the blank dimensions and the figure were calculated and choosed, the allowable deformation degree was checked, the equipment for
|
|
|
文摘:分析了计数器齿轮的冷模锻工艺，设计了冷模锻件图，计算及选用了毛坯尺寸及形状，验算了许可变形程度，选择了变形用的设备，拟制了冷模锻前的毛坯处理及设计了冷模锻模具结构。 |
|
Abstract: In this paper, the compression equations for irregular shape materials of soybean and wheat grain, and a new “Z” transformation method for the stress relaxation parameters identification were put forward.
|
|
|
文摘:提出了不规则形状的大豆、小麦种子的挤压方程和应力松弛参数识别的Z变换法。 |
|
Abstract: In this paper, the conditions of naturalness, ag riculturalproduction and country societal economy in the development of agricultural mechanization of Yunnan were analyzed, the characteristics, petition and the developmental situa tion of the ag
|
|
|
文摘:分析了发展云南省农业机械化的自然条件、农业生产条件和农村社会经济条件，并提出了与此相适应的农业机械化技术和机具特点、要求和发展方向。 |
|
Abstract: In this paper, the control model of heating substation system is built according to the character of heating system, in order to improve control accuracy, to diminish shake-frequency of valve and strengthen stability of system.
|
|
|
文摘:针对热力系统的特点，围绕着如何提高控制精度及如何减少阀门动作频率和提高系统的稳定性等问题进行了探讨，建立了热力站系统的控制模型。 |
|
Abstract: In this paper, the design method of spring component isintroduced based on given parameter, which is suitable for national standard common cylindrical coil compression spring and national standard polyurethane spring component.
|
|
|
文摘:介绍了适用普通圆柱螺旋压缩弹簧国标和聚胺酯弹性元件国标所给参数的弹性元件设计方法。 |
|
Abstract: In this paper, the design of the sense organ of the silicon miniature inertial meter is presented .The approving structure of the sense organ is fulfilled by the fabrication techniques of laser processing and chemical etching, laser fibre optic
|
|
|
文摘:设计了硅微型惯性加速度计的敏感头并应用激光加工和化学蚀刻相结合的工艺方法制造得到了满意的结构，应用激光光纤测振仪检测了悬臂梁振动特性。 |
|
|
|
