|
| In this paper, the cold die forging technology of the counter gear was analysed, the cold die forging was designed, the blank dimensions and the figure were calculated and choosed, the allowable deformation degree was checked, the equipment for the deform |
中文意思：
分析了计数器齿轮的冷模锻工艺，设计了冷模锻件图，计算及选用了毛坯尺寸及形状，验算了许可变形程度，选择了变形用的设备，拟制了冷模锻前的毛坯处理及设计了冷模锻模具结构。 |
以下为相关句子列表(点击查看，可以看对应的解释）：
|
|
In this paper, the characteristic of catalytic diesel particulate filter(CDPF) used for particulate matter trapped from diesel engine is introduced, the methods of catalytic regeneration are reviewed, and the present research of ceramic honeycomb carrier
|
|
|
摘要介绍了柴油机微粒后处理催化捕集器特点，评述了过滤器催化再生方法，综述了蜂窝陶瓷载体涂层及催化剂活性组分研究现状。 |
|
In this paper, the characteristics and selection of flat screen printing machine, rotary screen printing machine, stentering and heat setting dryer, open width washing machine were all introduced.
|
|
|
摘要介绍平网和圆网印花机，以及拉幅、热定形、烘燥机和平幅水洗机的基本特性及其选择。 |
|
In this paper, the characteristics and the causes of antidumping from other countries were studied, and the main measures against antidumping were brought forward.
|
|
|
摘要本文分析了国外对我国出口商品实施反倾销的特点及原因，提出应对国外反倾销的主要措施。 |
|
In this paper, the characteristics and types of interchange behavior are analyzed from interchange position, time, directions and the ways of passenger behavior.
|
|
|
摘要从地铁换乘行为分析入手，分析地铁换乘车站内的换乘方向与换乘点、换乘方式、换乘时间等换乘行为特点，换乘行为类型。 |
|
In this paper, the characteristics of large plane-pure-shear deformation is analyzed. Based on the principle of strain accumulation, the equivalent strain formulae of large plane-pure-shear deformation is derived.
|
|
|
摘要本文分析了平面纯剪切大变形的变形特徽，基于应变累积的观点，推导出等效应变值的计算公式。 |
|
In this paper, the cold die forging technology of the counter gear was analysed, the cold die forging was designed, the blank dimensions and the figure were calculated and choosed, the allowable deformation degree was checked, the equipment for the deform
|
|
|
分析了计数器齿轮的冷模锻工艺，设计了冷模锻件图，计算及选用了毛坯尺寸及形状，验算了许可变形程度，选择了变形用的设备，拟制了冷模锻前的毛坯处理及设计了冷模锻模具结构。 |
|
In this paper, the complementary mechanism of air and water temperatures in the earth ecosystem is proposed, each procedure in the complementary mechanism running process is illustrated by the block diagram, the process of effect of human being on ecologi
|
|
|
摘要首次提出了地球生态系统的气温和水温补充机制，并用框图模型说明了补充机制在运行过程中的每个流程，阐明了人类对生态环境的影响过程、生态环境变化对地球生态系统的影响过程以及地球生态系统对环境变化的响应过程，解释了气温和水温的补充起因。 |
|
In this paper, the composition of surgical instrument is described, and the laser control including the communication between computer and laser device, laser pulse on-off control and gas exchange are detailed.
|
|
|
本文简述了一准分子激光眼科治疗机的整体组成部分，并详细描述了激光器的控制部分：计算机与激光器的通信控制、激光发射停止控制、充换气流程控制。 |
|
In this paper, the concentration of Si in the aluminium-silicon is determined by XIWS (X-Ray Fluoresent Spectrum). The method is simple rapid, accurate and reproducible.
|
|
|
摘要本文介绍采用X射线荧光法测定矽铝合金中矽含量的方法及相关条件，并对测量结果精度进行分析。本方法具有样品前期处理简便、干扰因素小，且快速、准确等特点。 |
|
In this paper, the construction control of the embankment of Contract No. 31 of Qinghai-Tibet Railway is described.
|
|
|
介绍青藏铁路第31标段加筋土挡土墙工程路基的施工控制内容。 |
|
In this paper, the construction method for the hinged steel bearings and hinged sliding plate bearings specially designed for the Bridge is presented.
|
|
|
介绍针对本桥专门设计的铰轴钢支座和铰轴滑板钢支座施工方法。 |
|
|
|
