|
Remove rust, mill-scale and other loose material by abrasive blasting or power tool cleaning.
|
|
|
用喷砂或其他电动工具除去铁锈、氧化皮等。 |
|
Remove salt and other water-soluble contaminants by fresh water hosing.
|
|
|
用清水冲去盐份以及其它水溶性污物。 |
|
Remove screw from one side of the splash guard.
|
|
|
从防溅保护一侧拆卸螺丝。 |
|
Remove selected data from the document and store it on the clipboard .
|
|
|
从当前文件把数据移开并把它存储在剪贴板上。 |
|
Remove selected data from the document and store it on the clipboard.
|
|
|
从当前文件把数据移开并把它存储在剪贴板上。 |
|
Remove skinless tomatoes. Mash to puree with wooden spatula.
|
|
|
取出罐装无皮番茄，用木勺压烂。 |
|
Remove spring cage, spring and washer. Remove bottom plug. Grasp upper and lower stem lock nut with wrench and loosen. Clean or replace any damaged or worn parts.
|
|
|
拆卸弹簧笼，弹簧和垫圈。拆卸底部塞。用扳手抓住上部和下部阀杆锁紧螺母并且松开。清洗或更换任何损坏或磨损部件。 |
|
Remove stem assembly (A) and lock setting by drilling hole and inserting dowel pin (C).
|
|
|
拆卸阀杆总成(A)，并且通过钻孔锁定设置和插入定位销(C)。 |
|
Remove stem nuts (22). Keep stem from turning by inserting screw driver in slot on end of stem.
|
|
|
拆卸阀杆螺母(22)。通过在阀杆末端的槽内插入螺丝刀来避免阀杆旋转。 |
|
Remove the #1 check module (Figure C) by inserting two flat blade screwdrivers into the slots on either side of the check module and gently pry the check module toward the open zone.
|
|
|
将两把平头螺丝刀插入到止回阀模块的每一侧，轻轻的将止回阀模块朝开口处撬，用此方法拆卸1号止回阀模块（图C）。 |
|
Remove the AC power adapter from the notebook PC.
|
|
|
拆除交流电源适配器的笔记本电脑. |
