|
The analysis of variance for the grey relational grade was implemented, and the optimum value of multi-objectives was obtained, so that the optimum combination of the factors was confirmed.
|
|
|
对目标序列的灰色关联度进行方差分析，得到目标函数的最优解，从而获得最佳参数。 |
|
The analysis of variance showed that the difference among treatments reached at the 1% significant level.
|
|
|
方差分析表明，处理间差异达到1%显著水平。 |
|
The analysis on the mismatch between transportation equipments and operation condition, more throttling loss and power consumption in Qinhuangdao Beijing Oil Pipeline is made.
|
|
|
摘要对秦京管道因混输冀东原油后秦皇岛－迁安管段输量下降16%，造成输油设备与运行工况不相匹配，出现节流损失大、能源浪费大的问题进行了分析。 |
|
The analysis on the relationship of the center frequency deviation and the microstrip open-end effect is given.
|
|
|
同时分析了导致这种偏移的原因，并阐述了该方法的理论基础。 |
|
The analysis provides a reliable reference for the optimal design of a hydro-bulged axle housing.
|
|
|
研究为液压胀形桥壳优化设计提供可靠的参考。 |
|
The analysis result indicates that the main reason for the failure of devices in the life test is due to techniques and design problems in chip thermal disperse structure , which is also the main problem affecting the working life of high frequency power
|
|
|
分析结果表明器件在寿命试验中发生击穿失效的主要原因是芯片的散热结构存在工艺和设计方面的问题，这也是影响高频大功率工作寿命的主要问题。 |
|
The analysis result shows that the whole system could reach not only a static balance hut also a dynamic balance at all time because of the special phase angle relation, it keeps all the advantages of the traditional cycloidal-pin wheel planetary gear tra
|
|
|
分析表明，由于四片环板采用了特殊的相位角关系，整个系统不仅能够达到静力平衡，而且能达到任意时刻的动平衡，同时又保留了摆线针轮行星传动的优点，是一种具有发展前景的传动形式。 |
|
The analysis results demonstrated that its efficiency in factors analysis of multi-factors, multi-levels and few testing time mix proportion uniform-design experiment of flexible concrete.
|
|
|
分析结果表明改进的灰色关联度在多因素、多水平数、试验次数偏少的柔性混凝土配合比均匀试验的数据分析中是很有效的。 |
|
The analysis results indicate that the correlative influence factors to the technological capabilities of electronic solders include the composition and purity and chemical uniformity of solder alloy, the composition and properties of mother materials and
|
|
|
分析表明：相关的影响因素主要包括合金的组成、纯度和化学均匀性；母材的成分、性质和表面的洁净度；液态焊料的表面张力；钎焊温度、气氛、助焊剂的活性；液态焊料表面膜的组成、结构和性能等。 |
|
The analysis results of the whole dam show that random cracks are avoided effectively by the artificial short slit in the central monolith.
|
|
|
大坝整体的仿真计算结果表明，在坝段中部设置的人工短缝开裂后，有效地避免了随机裂缝的发生。 |
|
The analysis results show that process is the most important effect factor for the prophase reliability of mixed solder joint, and environment is the most important effect factor for the anaphase reliability of mixed solder joint.
|
|
|
分析结果显示，工艺对混合焊点的前期可靠性影响最大，环境对混合焊点的后期可靠性影响最大。 |
