|
Abstract: The mechanism and the choice of processing conditions of silica dielectric in ULSI manufacturing were studied.The way of increasing the polishing rate and improving the surface condition by using chemical method was suggested.The question of dep
|
|
|
文摘:对超大规模集成电路制备中二氧化硅介质的抛光机理、工艺条件的选择进行了大量理论和实验研究，着重研究了使用化学方法提高抛光速率、改善表面状况以及如何解决抛光浆料的沉积等问题，并实现了技术突破。 |
|
Abstract: The mechanism of dust extinguishing by magnetization water is expounded,the experiment results are analysed,and the technical ways of industry imprementation are defined.So,a new technique measure for industry dustproof is added.
|
|
|
文摘:阐述了磁化水灭尘的机理，分析了实验结果，确定了工业实施的技术途径，为工业防尘增添了新的技术措施。 |
|
Abstract: The mechanism of vision automatic guided and automatic drive of farm working group and mechanism of achieving farm corn fertilizing at certain place in certain time with certain quantity fertilizer according to the recognized growing status of c
|
|
|
文摘:分析了采用机器视觉识别大田玉米的生长状况进而实现大田玉米定时、定点、变量精确施肥和实现农业机组的视觉自主导航和无人驾驶的机理。 |
|
Abstract: The method about constructure of a new compactly supported orthonormal wavelet and scale function concerned is put forward and the exponent regularity of the kind of wavelet and related scale function is estimated accurately.
|
|
|
文摘:提出了一类新的具有紧支集的标准正交小波基以及相关的尺度函数的构造方法，准确估计了该类小波和相关尺度的正则性指数。 |
|
Abstract: The method and circuits of four-electrod-half bridge technique for the measurement of conductivity and permittivity of fermentation liquid are presented.
|
|
|
文摘:提出了用替代网络－四电极－半桥技术测量发酵液的电导率和电容率的方法和电路。 |
|
Abstract: The method for analyzing meteorological data based on imformation distribution is given. The experimental results show that objective law of meteorological data can be easily obtained by the method.
|
|
|
文摘:从信息的角度出发，给出了一种基于信息分配的气象数据分析法。该方法对气象数据的客观规律有较好的估计。 |
|
Abstract: The method framework of object-oriented simulation are introduced.Its concept and basic structure is indicated in detail.By studying on simulation of guide control system of one antiaircraft missile,its existence and importance on study of syste
|
|
|
文摘:提出了面向对象仿真方法框架，详细说明了它的概念和基本结构，通过对某型防空导弹制导控制系统的仿真研究，证明了它的合理性和在系统仿真研究中的重要性。 |
|
Abstract: The method of detecting position and the estimatation of position have been put forward for the move-in-mud robot ,means of error computation have been programmed.The feasibility of this method has been approved through analyzing estimated resul
|
|
|
文摘:基于倾角传感器，提出了蠕动爬行式拱泥机器人的位置检测方案、位置估算方法，编制了位置估算和误差计算程序，并对估算结果进行了分析，证实这种估算方法是可行的。 |
|
Abstract: The method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
|
|
|
文摘:研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法，并实现了计算程序。 |
|
Abstract: The method of generating infrared image of target in the sky was proposed.At first,the geometric model of the target in the sky was built with grid;Secondly,using the theory of aerodynamic and heat transmission,the thermal equation of the differ
|
|
|
文摘:提出了空中目标的红外图像生成方法，首先是空中目标的几何建模及其网格化，然后据飞机空气动力学和传热学原理提出了空中目标几种蒙皮(单层蒙皮、内有燃油蒙皮、发动机影响区蒙皮)的热平衡方程，然后以超音速飞机为例，介绍了方程的求解过程，最后给出了计算机的仿真结果及分析。 |
|
Abstract: The method of making a courseware by visual programming is introduced.The results show that the visual programming is a main mode to make an interactive courseware.
|
|
|
文摘:介绍用可视化编程的方法制作的一个课件，说明可视化编程是交互式课件制作的一个主要方式. |
